Spot welder

One, Main technical parameters

Second, the main body of the equipment:

The overall design of the equipment is simple and beautiful. Equipment frame adopts 40*40, wall thickness 3mm square steel welding processing, transformer outer cover adopts 2.0mm galvanized sheet, door panel adopts 1.5mm galvanized sheet, the entire surface spray treatment (color number RAL7035), the front without the supplier's conspicuous logo, stable and strong.

The exterior of the transformer is covered by the box, which is beautiful and safe.

The work surface is brushed with 8mm thick stainless steel plate.

Press-down mechanism phosphating.

The equipment is equipped with universal casters and provides a position for the shovel foot.

The device is equipped with adjusting feet to fine-tune the height of the entire device.

The welding power controller is hidden in the case, and the adjustment parameters are accomplished by leading to the "touch screen interface" on the countertop.

Third, the structure of the lower pressure mechanism:

Reference picture:

1, the pressure mechanism adopts C-shaped structure, strong rigidity;

2, the cylinder stroke is adjustable, can limit the electrode pressure distance, can help control the amount of wire harness deformation.

3, the diameter of 20MM guide column and tin bronze non-lubricating copper sleeve;

4, pressure adjustment using pressure regulator, pressure adjustment accuracy is higher, more stable air pressure.

5, copper soft connection, copper hard connection, conductive copper block raw material selection of T2 or above copper, copper content of more than 99.95%, to meet the high current and high load use.

Welding controllers and transformers

Medium frequency welding power supply, stable current output, closed loop control, will not be affected by the network voltage and impact on the network pressure. Customized transformer, suitable for long time current output of high current in motor lead welding.

Four, the main characteristics of the welding controller

1. Input voltage: three-phase 380V, 50HZ/60HZ, power supply fluctuation +10%, -20%;

2. Output voltage: single-phase PWM output 10.8V;

3. Programmable more than 60 groups of welding specifications, different copper terminals can be programmed corresponding specifications and saved;

4. Three stages of heating process: preheating, welding, tempering;

5. The welding section can be set to 99 pulse times repeated power;

6. Different specifications can be programmed pressure control, and can be stored in memory, and can no longer set pressure repeatedly;

7. Welding current and time can be stored;

8. Solder joint counting function.

9. Welding current storage system: The current storage system can save each welding current (generate EXCEL tables) to provide data support for daily production management.

Five, Pressure setting

The equipment has a pressure display system, pressure sensor, for each specification stator wire harness, the corresponding pressure can be set and saved.

1. The pressure value corresponding to each group of specifications can be set numerically by the controller and saved. Different specifications of copper terminals corresponding to different pressure values can be automatically switched, do not need to set.

2, in the whole welding process, the pressure can be displayed.

3, the configuration of the pressure sensor, in the setting of pressure or actual work, can display the actual pressure value (unit is kg or Newton).

Six, harness size monitoring function

Through this system, PLC can collect the welding pressure and displacement parameters and save and monitor them immediately.

The amount of wire harness deformation can be set and saved by PLC, and corresponding to the specification of current setting. When the wire harness deformation reaches the set value during welding, the welding power supply will stop discharging, and keep 1-3S, the cylinder is raised, and the welding is more consistent.

The amount of deformation is only set by PLC, without cylinder travel limits.

electrode

1, the number of electrodes: each square press is configured with 1 pair of electrodes (2 pieces);

2, the use of high-density tungsten alloy material or molybdenum alloy material electrode, long service life, oxidation resistance;

3, the use of specific design electrode, concave and convex electrode or flat electrode; Matching according to harness size;

Seven, Technical parameters of smoke filter (optional)

Eight, suitable for motor stator range:

1, motor stator outer diameter: 20-300mm.

2, harness cross-sectional area: the entire section up to 1-4m².

3, single enamelled wire diameter: less than 1.2mm.

4. The length of the lead line extending out of the stator shell: the length of the motor stator lead line extending out of the motor shell is ≥40mm;

Nine, Configuration

Ten, Packing List:

Eleven, Welding products display

Main applications: electric tool motor stator, brushless motor stator, shield pole motor stator, series motor stator, digital generator stator, transformer coil coil and other coil products enameled wire and atomic wire do not remove patent skin connection conduction; Copper and silver welding, etc.